If you are using any Custom ROM in OnePlus 2, you will face a problem in Camera App. No Doubt CM 13 by Grarak is awesome but only the disappointing Snap Camera App make me to not use it as a daily driver. You will face the same issue in Exodus ROM, Resurrection Remix, and all other custom ROMs as well but not in Hydrogen OS as it is a Stock OS of the Chinese version of OnePlus 2.
If you want to get the camera app of Oxygen OS in your Custom ROM, then simply installing the app will not work. All you need to do is flashing a Ported Zip file of Oxygen OS 3.0 Camera App. This Porting work is not done by me. An XDA Developer named ghbuur from Switzerland had done this Great Work.
Download Oxygen OS 3.0 Camera Zip file :
There are tons of useful articles and how-to guides on Droidphoria for the OnePlus 2, but we think you might be interested in the following posts :
- [Stable] Official MIUI 8 for OnePlus 2 VoLTE Android 6.0.1 Firmware
- Install CyanogenMod 13 on OnePlus 2 [Grarak Build]
- Overclock OnePlus 2 to 2.0 GHz Snapdragon 810 on CM 13 ROM
- Install Boeffla Kernel 5.0 alpha8 in CM 13 OnePlus 2 [Grarak Build]
How to Install Oxygen OS 3.0 Camera App in any Custom ROM based on CM / AOSP :
Step 1 : Download Oxygen OS 3.0 Camera App for CyanogenMod or any other AOSP ROM to your computer.
Step 2 : Connect and mount your OnePlus 2 USB memory to your computer using the USB cable.
Step 3 : Now copy/paste the downloaded Oxygen OS 3.0 Camera App zip files to your phone memory / SD card. Make sure the files are in the phone memory / SD card root (not in any folder).
Step 4 : Then turn OFF your phone and disconnect from the USB cable.
Step 5 : Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Down + Power buttons together.
Step 6 : Once you are in TWRP Recovery, perform a full Wipe Cache and Wipe Dalvik Cache by tapping on the ‘Wipe’ button. Then swipe on at the bottom.
Step 7 : Now go back to the main menu and then tap on the ‘Install’ button. From the list, choose the ZIP file that you copied to your phone memory in Step 3.
Step 8 : Confirm installation on the next screen by swiping on the “Swipe to Confirm Flash” option. The installation procedure should start now.
Step 10 : Again, Tap on the “ Wipe cache/dalvik ” button if you get into any boot loops or other issues.
Step 11 : You can now reboot your phone by selecting the “Reboot System” button.
That’s it! Your Custom ROM should now have Official OnePlus Oxygen OS 3.0 Camera App installed!
Tips : You can remove you previous Camera App by using Titanium Backup
Any problem during installation ? Let me know by commenting below! Also, don't forget to share, if you found this post helpful to you.